bristol, pa 19007-6810 usa tel (215) 781-9956 ? fax (215) 781-9845 printouts of this document may be out of date and should be considered uncontrolled ? info@arieselec.com www.arieselec.com features ? convert surface-mount qfp packages to a 15x15 pga footprint. ? reduce costs by using less-expensive qfp packages to replace pga footprints in existing designs. ? pins are mechanically fastened and soldered to board using aries patented process, creating a reliable electrical connection and rugged contact. ? consult factory for panelized form or for mounting of consigned chips. general specifications ? adapter body: fr-4 with 1-oz. cu traces ? pads: finished with enig (immersion au over electroless ni) ? pins: brass 360 1/2-hard per uns c36000, astm b16/b16m ? pin plating: is 200 [5.08] sn/pb 93/7 per astm b579-73 over 100 [2.54] ni per sae ams-qq-n-290 ? operating temperature: 221f [105c] mounting considerations ? suggested pcb hole size : 0.028 0.003 [0.71 0.08] dia. ? will plug into standard pga socket 18020 rev. aa p/n 96-160m65 160-position, 0.0256 [0.65] pitch qfp-to-pga adapter ordering information p/n 96-160m65 qfp-to-pga 15x15 adaptor p/n 96-160M65-P qfp-to-pga 15x15 panilized form p/n 160-pgm15043-30 qfp-to-pga 15x15 wire wrap customization : in addition to the standard products shown on this page, aries specializes in custom design and production. special materials, platings, sizes, and configurations can be furnished, depending on the quantity. note : aries reserves the right to change product general specifications without notice. all dimensions: inches [millimeters] all tolerances: 0.005 [0.13] unless otherwise specified row-to-row 0.003 [0.08] pin-to-pin 0.003 [0.08] non-cumulative consult factory for other sizes and configurations
|